Categories

Hot Products

Well Accessaries

Elevators

Elevators

Elevators Type DD Product description Model DD center latch elevators with square shoulder are suitable for handing drill collars, casing and tubings. The load ranges from 150 tons to 350 tons and the size ranges from 2 3/8 to 5 1/2. The products shall be designed and manufactured according to...
Send InquiryChat Now

Elevators Type DD

Product description

Model DD center latch elevators with square shoulder are suitable for handing drill collars, casing and tubings. The load ranges from 150 tons to 350 tons and the size ranges from 2 3/8 to 5 1/2. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

 

Specifications

Model

Size (in)



Rated Capacity  (short tons)

DP

CASING

TUBING

DD-100

2 3/8 to 5 1/2

4 1/2 to 5 1/2

2 3/8 to 4 1/2

150

DD-250

2 3/8 to 5 1/2

4 1/2 to 5 1/2

2 3/8 to 4 1/2

250

DD-350

2 3/8 to 5 1/2

4 1/2 to 5 1/2

2 3/8 to 4 1/2

350


Elevators Type DDZ

Product description

DDZ series elevators are center latch elevators with 18 degree taper shoulder, applied in handing the drill pipes and drilling tools, etc. The load ranges from 100 tons to 750 tons and the size ranges from 2 3/8 to 6 5/8.The products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment.


 Specifications

Model

Size(in)

Rated Capacity   (short tons)

Remark

DDZ-100

2 3/8-5

100

MG

DDZ-150

2 3/8-5 1/2

150

RG

DDZ-250

2 3/8-5 1/2

250

MGG

DDZ-350

3 1/2-5 7/8

350

GG

DDZ-350TD

3 1/2-5 7/8

350

FRO TOP DRIVE

DDZ-500

3 1/2-6 5/8

500

HGG

DDZ-500TD

3 1/2-6 5/8

500

FOR TOP DRIVE

DDZ-750

4-6 5/8

750



Elevators Type CDZ

Product description

CDZ drill pipe elevators are mainly used in the handing and hoisting drill pipes with 18 degree taper and tools in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


 Specifications 

Model

Size (in)

Rated Capacity   (short tons)

CDZ-150

2 3/8-5 1/2

150

CDZ-250

2 3/8-5 1/2

250

CDZ-350

2 7/8-5 1/2

350

CDZ-500

3 1/2-5 1/2

500


Elevators Type TA

Product description

Model TA center latch elevators with square shoulder are suitable for handling drill pipes, drill collars, casings and tubings. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Size (in)

Rated Capacity   (short tons)

DC

Tubing

CASING


NUEU

TA-35

2 7/8-3 1/8

1.05-2 7/8

1.05-2 7/8

/

35

TA-65

2 7/8-3 1/8

1.66-2 7/8

1.66-2 7/8

/

65

TA-100

3 1/8-5 1/4

2 3/8-5

2 3/8-4 1/2

/

100

TA-125

3 1/8-5 1/4

2 3/8-5

2 3/8-4 1/2

/

125

TA-150

4 1/8-11 1/4

/

/

4 1/2-10 3/4

150


Elevators Type CD

Product description

Model CD side door elevators with square shoulder are suitable for handing tubings, casings, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Size (in)

Rated Capacity   (short tons)

CD-100

2 3/8-5 1/2

100

CD-150

2 3/8-14

150

CD-200

2 3/8-14

200

CD-250

2 3/8-20

250

CD-350

4 1/2-20

350

CD-500

4 1/2-14

500

CD-750

4 1/2-9 7/8

750


Elevators Type SX

Product description

Model SX side door elevators with square shoulder are suitable for handing casings in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Size   (in)

Rated Capacity (short tons)





SX   7-16


7

350-500

9   5/8
9   7/8
10   3/4
11   3/4
12   3/4
12   7/8
13   3/8
13   3/8
14
16

SX   18 5/8 - 20

18   5/8

20


Elevators Type SLX

Product description

Model SLX side door elevators with square shoulder are suitable for handling tubings , casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model  

Size (in)

Rated Capacity   (short tons)

SLX-65

3 1/2-14 1/4

65

SLX-100

2 3/8-5 3/4

100

SLX-150

5 1/2-13 5/8

150

SLX-250

5 1/2-30

250

SLX-350

4 1/2-14

350


Y Series Type Elevators

Product description

The slip type elevators are indispensable tools in handling and hoisting drill pipes, casings and tubings in oil drilling and well tripping operation. It’s especially suitable for hoisting integrated tubing sub, integral joint casing and electric submersible pump column.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Size mm(in)

Rated Capacity


kNshort tons

HYT

60.3-88.9(2 3/8-3 1/2)

1350

150

YT

33.4-88.9(1.315-3 1/2)

675

75

MYT

33.4-73(1.315-2 7/8)

360

40

LYT

26.7-52.4(1.05-1 1/16)

180

20

HYC

88.9-139.7(3 1/2-7 5/8)

1800

200

MYC

88.9-117.8(3 1/2-7)

1125

125

YC

88.9-117.8(3 1/2-7)

675

75


Single Joint Elevators Type SJ(Auxiliary Elevators)

Product description

SJ series auxiliary elevators are mainly used in handling single casings or tubings in oil drilling natural gas drilling and cementing operation. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Size

Rated Capacity(kN)


in

mm

45

2   3/8-2 7/8

60.3-73.03

3   1/2-4 3/4

88.9-120.7

5-5   3/4

127-146.1

6-7   3/4

152.4-193.7


8   5/8-10 3/4

219.1-273.1


11   3/4-13 3/8

298.5-339.7


13   5/8-14

346.1-355.6


16-20

406.4-508.0


21   1/2-24 1/2

546.1-622.3

60

26-28

660.4-711.2

30-36

762.0-914.4


Single Joint Elevators Type SP(Auxiliary Elevators)

Product description

SP series auxiliary elevators are mainly used in handling single tubings, casings and drill pipe with taper shoulder. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

 

Specifications 

Model

Size   (in)

Rated Capacity (short tons)

SP5’’

2   3/8-10 3/4

5

SP12’’

2   3/8-4 1/2

SP18’’

2   7/8-6 5/8


Single Joint Elevators Type SJX(Auxiliary Elevators)

Product description

SJX series auxiliary elevators are hoisting tools for handling single pipes or working together with the professional tools CRT to move the tubulars from gate to well centre.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Size (in)

Rated Capacity (short tons)

SJX-5

2 3/8-4 1/2

5

SJX-5

4 1/2-7

SJX-5

7-10

SJX-5

10-14


Hydraulic Elevators Type DDZH

Product description

Hydraulic elevators type DDZH is a center latch elevator. Through changing the bushing, it can handle drill pipes, drill collars, casings and tubings. By using the hydraulic-controlled system, it can make the operation more convenient, reduce the workers’ labor intensity effectively and improve work efficiency. It can also realize remote controlling and make the using safer and more reliable.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Tubular &Size

 (in)

Rated Capacity (short tons)




WITH  18° taper

Casing

DC

Tubing



DDZH-250

2   3/8-5

4   1/2-5

3   1/8-5 1/4

2   3/8-4 1/2

250

DDZH-350

2   3/8-6 5/8

4   1/2-7

3   1/8-6 3/4

2   3/8-5 1/2

350

DDZH-500

2   3/8-6 5/8

4   1/2-7

3   1/2-6 3/4

/

500


Hydraulic Elevator Type CDZH

Product description

Hydraulic elevator type CDZH is a side door elevator with double-value structure. Through changing the bushing, it can handle pipes, drill collars, casings and tubings. By using the hydraulic-controlled system, it can make the operation more convenient, reduce the workers’ labor intensity effectively and improve the work efficiency. It can also realize remote controlling and make the using safer and more reliable. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Tubular &Size 

(in)

Rated Capacity (short tons)




WITH  18° taper

Casing

DC

Tubing



CDZH-500

3 1/2-6   5/8

4   1/2-9 5/8

4   3/4-5 9 3/4

2   3/8-4 1/2

500


Air -operated Elevator

Product description

Air operated Elevators are conventional elevators to which power actuation has been added. This feature permits remote opening and closing of the elevators. It can meet normal working requirement in oil drilling & workover and also reduce workload. They are designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.


Specifications

Model

Applicable diameter of tubulars (in)

Rated Capacity (short tons)

DD-150

4 1/8-8 5/8

150

DDZ-500

3 1/2-6 5/8

500



Hot Tags: elevators, China, suppliers, manufacturers, factory, wholesale, customized, buy, price, in stock
  • QR CODE
  • facebook